The new ThreeSix wedge riser kits are the latest low-profile wedge risers that have been shipping with ThreeSix mini completes for the past few months! These 8-hole wedges are designed to mount on any deck between (almost) any trucks.

Available in 4 angles to dial in your setup:

• 3° Rails

• 6° Rails

• 10° Rails

• 15° Wedge (available with or without tail mount bolts for the mini)

The Full Kit option is also available to let you get 16 stackable combinations including +/-3°, 6°, 9°, 10°, 12°, 13°, 15°, 16°, 18°, 19°, 21°, 24°, 25°, 28°, 31°, and 34° all in one kit!

Note: When adding wedge risers, longer bolts will be needed to go through your deck, risers, and trucks. Get the countersunk flathead-style ones so they can angle themselves better, not pan/truss head. Do not over tighten your bolts. Ride them a few times and re-snug if you need to.

For ThreeSix Minis and Topmounts (or thin 4-ply wood/composite decks):

• For tail mounting the 15° on the ThreeSix mini to level it out, get the 15° that comes with bolts. 1.125” bolts will work on the thin end and 1.75” on the thick end.

• On the ThreeSix mini and topmount decks, the following bolts will be needed:

  • For 15°, use 1.75” on the thick end and 1.125” on the thin end.

  • For 15° + 10°, use 2.5” on the thick end and 1.375” on the thin end.

  • For 15° + 10° + 6°, use 3” on the thick end and 1.5” on the thin end.

  • For 15° + 10° + 6° + 3°, use 3” on the thick end and 1.75” on the thin end.

For ThreeSix Double Drops and most 6 to 7-ply wooden decks:

• On the ThreeSix mini and topmount decks, the following bolts will be needed:

  • For 15°, use 2” on the thick end and 1.25” on the thin end.

  • For 15° + 10°, use 2.75” on the thick end and 1.5” on the thin end.

  • For 15° + 10° + 6°, use 3” on the thick end and 1.75” on the thin end.

  • For 15° + 10° + 6° + 3°, use 3.5” on the thick end and 2” on the thin end.

    Note: Add 0.125” extra for 9-ply decks and also add extra for any flat risers you might be using.